GREAT LAKES AIR SYSTEMS, INC. PRESENTS PLASER Great Lakes Air Systems, is introducing Plaser as the solution for metal cutting air filtration. Plaser is specifically designed for the unique needs of the laser and plasma cutting industry. The customer-driven product far exceeds manufacturer demands and has taken the filtration industry to new levels. Plaser Exclusive Features: Designed specifically for plasma, laser and torch cutting, Powerful consistent airflow andLonger filter life. For more information about Great Lakes Air Systems, contact 248.655.1800 or go to www.plaservent.com.

THE IEVAC® FIRE ESCAPE HOOD The iEvac® Fire Escape Hood is first to earn Certification to the new American Standard ANSI/ISEA110. iEvac® protects against fire-related risks including toxic gases, harmful particulates and life-threatening physical hazards. American certification involves rigorous independent testing against many challenges including carbon monoxide, smoke, hydrogen cyanide, sulfur dioxide, other gases, particulates, fumes, soot, flammability, radiant heat & environmental conditioning. Additional testing has been performed by the US Army Edgewood Chemical Biological Center. For more information visit www.elmridgeprotection.com or call 561.244.8337.

2156 CO2 MONITOR 2156 is a Carbon Dioxide monitor designed as a health and safety monitor for use in areas where CO2 is generated, such as, bottling lines, fermentation rooms, bakeries, rising rooms, breweries, wineries and other food preparation areas. Also used for areas using CO2 fire suppression systems, such as, data processing rooms, telecommunications switching facilities, art & historical collections and process control rooms. Many ranges available and standard dual alarm set points. For more information visit www.val-tronics.com.

NEW DRENCH SHOWER DESIGN FROM BRADLEY ENHANCES EMERGENCY SHOWER PERFORMANCE For emergency situations when every second counts, the new SpinTec™ drench shower from Bradley provides a superior washdown in a shorter amount of time than other emergency fixtures. The innovative SpinTec showerhead delivers a more even distribution of water. Its unique shower pattern rinses more effectively at a higher velocity, resulting in faster removal of hazardous contaminants from the affected user. SpinTec meets all ANSI and EU standards for emergency drench equipment. A built-in flow control makes Bradley’s SpinTec as waterefficient as it is effective. Compared to most units with no flow control, the SpinTec uses 66 percent less water. For more information visit www.bradleycorp.com.

REACH–EU REGULATIONS WEB SEMINAR AVOID DISRUPTIONS TO YOUR SUPPLY CHAIN! Learn what you, your suppliers, and your customers must do now and in the upcoming years to assure compliance with the European Union’s new REACH chemical registration mandates! Even if you do not trade directly with Europe, you can still be affected by these chemical/product restrictions. At this informative web seminar, Lion's regulatory experts will provide practical and important insights for everyone involved in the REACH implementation process. Mandatory deadlines pending! Register today. For more information visit, www.lion.com/Catalog/ PopUp/EHS_C40.asp.

RECHARGEABLE LANTERN ONLY LANTERN OF THIS KIND IN THE MARKETPLACE The Sunlite GX1 Class 1, Division 1, rechargeable lantern. It has been engineered to provide long lasting illumination (12 hour continuous run time) for professionals working in hazardous environments including utility companies, laboratories, chemical and industrial facilities, mines, grain processors, marinas, refineries, and public safety departments, as well as any other environments where explosive material may be present. For more information visit, www.qorpak.com.

SEQUESTR™ EXTERNAL DISCONNECT ENCLOSURE ALLOWS ACCESS WITHOUT OPENING THE DOOR TO RISK SEQUESTR™ External Disconnect Enclosure that isolates the disconnect switch from the main control panel while maintaining the door interlocking requirements of NFPA 79, IEC60204, and SAE HS1738, the principle standards for industrial machinery. When the main power is on at the disconnect, SEQUESTR’s own door cannot be opened, and its interlock prevents the main control enclosure door from being opened. This interlocking feature distinguishes the SEQUESTR External Disconnect Enclosure from a traditional safety switch and maintains compliance with industrial machinery standards. For more information, visit www.hoffmanonline.com.

SEVO® SYSTEMS LAUNCHES A “ONE FOR ONE” HALON RETROFIT FIRE SUPPRESSION SYSTEM The SEVO 1230 “One for One” retrofit fire suppression system simplifies the conversion from halon 1301 to Novec 1230 fluid. Generally the existing halon 1301 piping network can be utilized and the existing halon 1301 cylinder will be replaced with a SEVO 1230 cylinder containing Novec 1230 fluid pressurized to 500 psig along with replacement of existing nozzles. The SEVO 1230 “One for One” retrofit system minimizes the space required because the same number of cylinders are required. This reduces the overall installation cost for both labor and hardware. The system is approved by Factory Mutual, a Division of FM Global, and a major industrial insurer. For further information, visit www.sevosystems.com.

NOW STERILIZE WITHOUT FLAME! The electrical sterilization system SteriMax is ideal for the sterilization of inoculation loops, needles and instruments. The SteriMax is ideal for laboratories and safety cabinets where the use of gases and open flames is not permitted or unavailable. The sterilizing tube into which the items are inserted is made of wear-resistant quartz glass, reaches its optimal temperature of 900°C (1650°F) after only a few minutes. To sterilize the inoculation loop, simply insert it into the quartz tube. A 100 percent stainless steel design makes the SteriMax resistant to even the most extreme laboratory conditions. For more information visit www.WLD-TEC.com.

PNEUMATIC LOAD LEVELER AUTOMATICALLY ADJUSTS PALLET HEIGHT AS BOXES ARE ADDED OR REMOVED The P3™ Pneumatic Leveler from Presto Lifts Inc. allows operators to build or break down pallet loads with a minimum of bending, reaching, stretching, or walking around. The unit automatically adjusts the height of pallets as boxes are added or removed. Height adjustment is achieved by a heavy-duty reinforced rubber airbag combined with a permanent spring. Because the P3 is pneumatic it can handle widely varying pallet load weights (from 400 to 4,500 pounds). It can be used anywhere that shop air is available. For more information call 508.222.0177 or visit www.prestolifts.com.